How to Create a Penis Envy spore syringe?

To create a spore syringe, mature PE mushrooms are first harvested, and their spore prints are collected by placing the mushroom caps on a sterile surface, such as glass, foil, or paper, and allowing the spores to drop naturally. Once a sufficient amount of mushroom spores has been collected, they are mixed with sterile water, usually with the help of a syringe or pipette, to create a spore suspension. This suspension is then drawn into a sterile syringe, which is capped and sealed for later use. When it is time to inoculate a growth medium, such as a sterilized grain jar or a substrate-filled bag, the needle of the spore syringe is inserted through a small opening or self-healing injection port, and the spore solution is gently expelled onto the medium. The mushroom spores will then germinate, colonize the substrate, and eventually produce mushrooms if optimal environmental conditions are maintained throughout the cultivation process.

Buy Penis Envy mushroom spores online

Order Penis Envy mushroom spores syringes online from Psilocybin Circus. 

Penis Envy – arguably the most sought-after magic mushroom spores on Earth – has much higher concentrations of psychotropic alkaloids and a higher ratio of psilocin to psilocybin. PE fruits rarely drop spores – swabbing is usually the go-to technique. This notable lack of spores has contributed to the market’s scarcity of authentic Penis Envy spore syringes. You can expect fast shipping from our team once we receive payment.

The original Penis Envy strain of psilocybin mushroom is known for its large and distinctive caps and high potency. This strain is known for its unique visual characteristics and higher concentrations of psychoactive compounds than other strains.

Our Penis Envy mushroom spore syringe is made using high-quality spores that have been carefully sourced from a reputable supplier. Each syringe is made using sterile techniques to ensure the purity and viability of the mushroom spores. This ensures that you get the best results when it comes to research.

The look of PE mushrooms is large, thick, and dense stems, typically white, along with this strain’s hallmark underdeveloped and bulbous cap that is much more rounded than other psilocybe cubensis spores varieties. In addition, the lack of a velum separating the cap and stem often creates an aesthetic that can look similar to the foreskin (that’s right). Penis Envy mushrooms are one of the densest magic mushrooms (mainly depending on the substrain). While they are shorter and smaller than other species, they still possess substantial weight due to their density.

Penis Envy mushroom spores are a unique and highly sought-after strain of psilocybin mushrooms. Known for their distinctive phallic shape and intense psychedelic effects, these spores are the perfect choice for experienced mushroom enthusiasts looking to add some excitement to their next trip.

With a high potency level and a fast-acting onset, Penis Envy shrooms are known to produce intense visual hallucinations, mind-bending alterations in perception, and deep spiritual experiences. These spores are also highly resistant to contamination, making them easy to grow at home. If you are looking for the perfect spores for microscopy research purposes, the original Penis Envy spores are a perfect choice. Order yours today.

What species are Penis Envy mushrooms?

Penis Envy magic mushrooms are a unique and intriguing strain of Psilocybe cubensis mushrooms with a hotly-debated origin story. These cubensis strains have come to be known as the most potent Psilocybe cubensis mushroom in existence.

According to the legend, the original Penis Envy comes from a giant, mysterious mushroom found deep in the Amazon Rainforest by esteemed ethnobotanist, psychonaut, mystic, lecturer, author, and advocate for psychedelic plants, Terence McKenna. The strain was then propagated until the phallic mutation developed and was replicated – giving us the strain we now know and love.

Penis Envy mushroom specifications – 50mm cap diameter, campanulate, golden brown/yellow color, and do not develop normally with diminished spore production. Up to 175mm long, with a contorted stem often bulbous in the center, which is pale yellow. Stipe bruises blue-green when handled. Lack a persistent annulus, but one can sometimes be found on the surface. Gills are underdeveloped and abnormal, never fully opening. Younger fruiting bodies have a grayish color that darkens during maturation. 

Alkaloid content in Penis Envy mushrooms

The higher psilocin to psilocybin ratio in Penis Envy seems to cause a faster onset of effects, which can feel heavy at first (especially for the psychedelic naive or those who don’t use a scale). However, the overall duration tends to remain the same as other strains (roughly six hours from start to finish, with a two to three-hour peak occurring after the first 60-90 minutes of ingestion). 

Anecdotal reports often claim that PE has less body load (challenging physical sensations such as nausea and muscle tension) and offers imbibers a light, energetic, ecstatic, and unencumbered experience. Many would call Penis Envy a ‘clean’ psychedelic experience.

These are the recommendations for magic mushroom dosing from Erowid (a harm-reduction site for psychedelic users):

• Threshold       .25g
• Light           .25 – 1g
• Common 1 – 2.5g
• Strong        2.5 – 5g
• Heavy      5g+

It is prudent to start with about 2/3 (or even less) of the standard suggested dose when taking Penis Envy mushrooms. The classic tale is someone taking their usual dose when using PE, and the result is a life-shattering experience that is often life-changing (for better or for worse).

The PE3 strain was founded by mycologist and psilocybin enthusiast, Terrence McKenna, and is known for its potent alkaloids and intense effects. This strain is believed to be more potent than the original PE strain, and is not recommended for beginners or those who are looking for a milder experience.

PE3 is for Advanced users. PE3 spore syringe is a powerful and potent addition to the Psilocybin Circus product line. This strain of psilocybin mushroom is ideal for advanced users looking for a stronger and more intense experience and is not recommended for beginners or those looking for a milder experience. Whether you are an experienced microscopist or just starting out, the PE3 spore syringe is an ideal option for anyone who wants to explore the world of psilocybin in a convenient, safe, and powerful way.

Specification of Albino Penis Envy mushrooms

APE has gills that turn bluish when handled, having caps 50mm+ wide with a strong bluing reaction when touched. Just as with classic Penis Envy, the caps do not develop fully and become quite bulbous, often turning blue when mature. Albino Penis Envy has a short and thick body with 60-175mm tall stems – which, depending on who you ask, is quite long for a [figurative] white penis.

APE, like Penis Envy, is a slow-growing strain, both with the mycelium and fruiting bodies. However, the result is a mushroom with unusually high alkaloid content. As with standard Penis Envy, the veils never fully open, and spore collection is tricky. 

Who started Albino Penis Envy?

Nobody can say who officially began the Abino PE mushrooms from crossing Penis Envy with Albino PF. This is because when genetics are replicated over several generations, they can weaken the strength of the fungus – creating the need to cross-breed with other strains and maintain genetic health (not entirely dissimilar from humans). However, Terence McKenna can be attributed to starting Albino Penis Envy in a sense since he (according to legend) gave birth to the original PE strain.

Most have not heard of Dr. Steven Pollock – the mycologist and researcher friend of Terence McKenna -, yet he was instrumental in creating Penis Envy (and subsequently, Albino Penis Envy). In 1981, Dr. Pollock was murdered, the context of which is at the root of many popular conspiracy theories. 

Before his untimely demise, Dr. Pollock took the Amazonian genetics shared with by McKenna and evolved them over several years by isolating fruiting bodies on agar (using tissue samples from the best specimens in each flush), which served to artificially enhance the speed of DNA development and change in the strain. 

Disclaimer

We sell premium spore syringes made in sterile laboratory environments containing trillions of mushroom spores per syringe, suspended inside a 10cc syringe in pharmaceutical-grade distilled water (for research purposes only). All our syringes are made in a negative-pressure HEPA-filtered clean room. The cultivation of cubensis mushrooms is illegal in the United States of America. Psilocybin mushroom spores are legal in 47 of the 50 states, excluding California, Georgia, and Idaho.